Residential/Commercial

Advantages of using our products for all your Residential/Commercial needs:

Stormwater Pits

  • Suitable for junction pits, grated pits and kerb inlet pits.
  • Knockout sections on all 4 sides provide easy pipe connection.
  • Can be used as a diversion irrigation system. 
  • Able to have customized doors fitted to each unit. 
  • Stackable extensions available for the desired height. 
  • Multiple lid options including grated, surcharged and plain. 
  • Lids available in various load class ratings. 
  • Additional Lids available to those listed.
  • To download Product Brochure [Click Here]


Lintels

  • Designed to take storm water drainage from road curbs. 
  • Made to withstand heavy vehicle loads with heavy duty galvanized grates. 
  • Suits pre-cast storm water inlet pit for easy  installation. 
  • Available in plain style, middle right and left openings to accommodate for the water flow direction.
  • Lintel without base/apron also available to allow for the ability to pour on site for custom application.  
  • 2.4M Lintel measurements are consistent with those of the 2.1m lintel with the only alteration the overall length. 
  • To download Product Brochure [Click Here]


Interlocking/Butt Pipes
  • Designed with a ‘male’ & ‘female’ end for ease of functionality.
  • Used for irrigation needs; supply drainage, sumps & crossings. 
  • Available with pipe sealing bands where  pipelines need to be flexible.
  • Manufactured to AS/NZS 4058:2007 Pre-cast concrete pipes (pressure & non-pressure) standards.
  • To download Product Brochure [Click Here]


Spigot Pipe
  • Typically used in conjunction with a pipe headwall and rubber ring joint pipe. 
  • Used for irrigation needs; supply drainage, sumps & crossings. 
  • Available in strength classes made to suit you irrigation needs. 
  • Manufactured to AS/NZS 4058:2007 Pre-cast concrete pipes (pressure & non-pressure) standards.
  • To download Product Brochure [Click Here]


Rubber Ring Joint Pipe
  • Quality reinforced flanged pipe for  irrigation.
  • Rubber ring coupling gives flexibility to eliminate joint cracks.
  • Allows for ground movement after Installation. 
  • Available in strength classes made to suit you irrigation needs. 
  • Manufactured to AS/NZS 4058:2007 Pre-cast concrete pipes (pressure & non-pressure) standards.
  • To download Product Brochure [Click Here]


Pipe Headwall
  • Wide range of sizes are manufactured to fit from 150mm to 1800mm inside diameter pipes.
  • Can be used to eradicate erosion in a lift pump situation.
  • Frequently used in access crossings, subdivisions and road works.
  • Also available in full neoprene to give a  water tight seal able to take a steel door.
  • Available with step for board control allows overflow to maintain you channel water level. 
  • New design has a self cleaning groove to remove debris from door slide.
  • Easy pipe installation with either a rubber ring or emer seal eliminating the need for any grouting. 
  • Multi-cell headwalls available to order. 
  • Quick lift & A-Frame systems available to suit.
  • To download Product Brochure [Click Here]


Nib/Sill
  • Available in half and full height.
  • Can be used to reduce silt build-up in pipes, increasing water flow rates.
  • Allows pipes to be set lower to allow greater water flow. 
  • Separate unit allows for adjustable heights.
  • To download Product Brochure [Click Here]


Sloped Headwall
  • Minimises hazard on shoulder of roads without compromising the batter of the soil.
  • Generally used by Roads & Maritime Services and Shire Councils across Australia. 
  • Sizes range to suit 300mm to 600mm inside diameter pipes. 
  • To download Product Brochure [Click Here]


Trafficable Headwall
  • Minimises hazard on shoulder of roads without compromising the batter of the soil.
  • Generally used by Roads & Maritime Services and Shire Councils across Australia. 
  • Sizes range to suit 300mm to 525mm inside diameter pipes.
  • To download Product Brochure [Click Here] 


Reinforced Concrete Box Culverts
  • Box Culverts are used in irrigation, drainage and bridge works for  domestic and government projects.
  • This product allows for a larger more natural water flow reducing erosion and can be laid with no cover needed. 
  • Ability to be inverted for ease of cleaning and maintenance. 
  • Designed to take extreme loads of pressure and any highway vehicle axle load permitted by the Roads & Maritime Services. 
  • Available in Over 120 different sizes.
  • Manufactured to AS 1597.1-2010 & AS 1597.2 2013
  • Dimensions may vary, please contact B.Altin & Co for confirmation.
  • To download Product Brochure [Click Here]


Base Plates/Link Slabs
  • Base Plates/Link Slabs available for most sizes of Box Culverts.
  • Base plates prevent undesirable sinking
  • Remove the need for footings or to pour on site with pre-cast ease. 
  • Additional sizes may be available.
  • To download Product Brochure [Click Here]


Sewer Access Components
  • Our sewer Components are made with high strength compressed concrete to cope with corrosive environments. 
  • Water tight maintenance holes.
  • Components fit together easily to create a complete system. 
  • Pre-configured base chambers are made to suit with either 45 or 90 degree inlet holes. 
  • Concrete plugs provided for a tight seal when inlet holes not in use.
  • Concrete and gatic lids available to suit. 
  • Bostik seal is used between joins for a water tight seal. 
  • Components have the option to include steps for ease of access. 
  • To download Product Brochure [Click Here]

Customized Manufacturing

  • Variations to products made to order.
  • Able to accommodate to suit your individual concrete needs. 
  • For more information contact our office and speak to our staff on 02 6962 1184


DELIVERY AUSTRALIA WIDE!